GPI 115 Volt Fuel & Oil Transfer Pumps

M-1115S 115-Volt AC Fuel Pump

The 115-volt version of the popular gear transfer pump is the M-1115S. Designed for stationary locations, the M-1115S offers a 30-minute duty cycle from a permanent magnet motor. Reliability and ease of maintenance are the hallmarks of this versatile fuel transfer pump.

Specs :

• Design Type - Rotary Gear
• Voltage - 115 Volts AC
• Flowrate - Up to 12 GPM(45 LPM)
• Duty Cycle - 30 Minutes On / 30 Minutes Off
• Power Cord - None
• Nozzle - Manual Shutoff
• Mechanical Connection - 1" Inlet, 3/4" Outlet
• Suction Pipe - Adjustable to 40"
• Hose - 12 ft, 3/4" diameter
• Motor Protection - Internal, auxiliary temperature-limiting device & circuit breaker
• Unique Features - Designed for stationary locations in fleet, agriculture, or light industrial applications
• To Use With - Diesel fuel (Up to 20% biodiesel blends such as B20), Gasoline (Up to 15% alcohol blends such as E15), Kerosene
• Approvals - CSA Certified, U.L. Listed
• Warranty - 2 years

M-3120 Heavy Duty 115-Volt AC Fuel Pump

This transfer pump is built with a 1/3 horsepower motor and designed for high performance. The M-3120 is the 115-volt transfer pump of choice for heavy equipment applications.

Specs :

• Design Type - Vane
• Voltage - 115 Volts AC
• Flowrate - Up to 20 GPM(76 LPM)
• Duty Cycle - 30 Minutes On / 30 Minutes Off
• Power Cord - None
• Nozzle - Manual Shutoff (ML model) or Automatic (AL model)
• Mechanical Connection - 1" Inlet, 1" Outlet
• Suction Pipe - None
• Hose - 12 ft(3.7m), 3/4" diameter
• Motor Protection - Internal temperature limiting device
• Unique Features - External switch coverplate allows for easy access and keeps U.L. rating intact
• To Use With - Diesel fuel (Up to 20% biodiesel blends such as B20) Gasoline (Up to 15% alcohol blends such as E15), Kerosene
• Approvals - U.L. Listed Motor to U.S. and Canadian Standards
• Warranty - 2 years

M-3130 Heavy Duty 115-Volt AC Fuel Pump

These are the pumps of choice for heavy construction, large farming and fleet operations. The 115-volt M-3130 provides the highest flow rate of any GPI transfer pump. The 3/4 horsepower motor runs efficient and cool, extending pump life. The unique strainer and poppet design allows easy access and easy maintenance. Available with either manual or automatic nozzle. Comes with 12 ft of 1 in. UL grounded hose. Pump and Motor are UL Listed to U.S. and Canadian standards.

Specs :

• Design Type - Vane
• Voltage - 115 Volts AC
• Flowrate - Up to 30 GPM(114 LPM)
• Duty Cycle - 30 Minutes On / 30 Minutes Off
• Power Cord - None
• Nozzle - Manual Shutoff (ML model)
• Mechanical Connection - 1-1/4" Inlet, 1" Outlet
• Suction Pipe - None
• Hose - 12 ft(3.7m), 1" diameter
• Motor Protection - Internal Temperature Limiting Device
• Unique Features - Unique strainer & poppet design allows for easy access & maintenance
• To Use With - Diesel fuel (Up to 20% biodiesel blends such as B20) Gasoline (Up to 15% alcohol blends such as E15), Kerosene
• Approvals - U.L. Listed Motor to U.S. and Canadian Standards
• Warranty - 2 years

L-5132 115/230-Volt AC Oil Pump

Use this oil transfer pump's 1 hp motor to measure oil (up to 90 weight), waste oil, hydraulic fluid, antifreeze and non-flammable oil-based solvents. The motor is a UL recognized component and CSA approved.

Specs :

• Design Type - Aluminum housing, gerotor gear
• Voltage - 115/230 Volts AC. Prewired for 115, also compatible with 230
• Flowrate - Up to 32 QPM(30 LPM)
• Duty Cycle - 30 Minutes On / 30 Minutes Off
• Power Cord - 36" three-prong grounded plug
• Nozzle - 3/4" ball valve
• Mechanical Connection - 1" Inlet, 3/4" Outlet
• Suction Pipe - Two-piece
• Hose - 8 ft., 3/4" diameter
• Motor Protection - Thermally protected
• Unique Features - Lightweight and suitable for waste oil
• To Use With - Oil (up to 90W), waste oil, hydraulic fluid, antifreeze, and non-flammable oil-based solvents
• Approvals - CSA Certified and U.L. Recognized Com-ponent
• Warranty - 1 year